Skip to content

UX Audit of the Sales Funnel: How to Find Where Users Get Stuck and What to Do About It

Updated: 11 min read
UX Audit of the Sales Funnel: How to Find Where Users Get Stuck and What to Do About It
Contents11 sections · 11 min read
  1. 1Start with your funnel, not with the charts
  2. 2What indicates that a user is “stuck”
  3. 3GA4 helps you see the path, not just the result
  4. 4Microsoft Clarity: where friction becomes visible
  5. 5How to read heatmaps without fooling yourself
  6. 6Forms are a separate source of loss that is often underestimated
  7. 7What to do if the numbers conflict
  8. 8Accessibility can also be the reason users get stuck
  9. 9What to expect from Clarity and what not to demand from it
  10. 10A practical workflow for a funnel UX audit
  11. 11Frequently asked questions

When a sales funnel starts underperforming, the first instinct is to look at the overall conversion rate and search for the “guilty” page. But a UX audit gives you much more than just a churn number. It shows exactly where users start hesitating, going back, getting stuck in a form, or failing to notice the desired action. In practice, that means looking not only at the drop, but at the journey: what people did before leaving, at which step they lost interest, and whether the interface showed any signs of friction.

For this, a combination of quantitative and qualitative analytics works well. GA4 helps you see user paths and the differences between those who converted and those who left. Microsoft Clarity adds session recordings, heatmaps, and funnels to show where friction occurs. And usability testing reveals the reason that metrics do not always expose: unclear copy, a difficult form, weak content hierarchy, or accessibility issues.

Key takeaways

  • Describe your funnel first, then look for drop-offs in reports.
  • GA4 shows where people leave; Clarity shows why.
  • Forms are often the main point of "silent" losses.

Start with your funnel, not with the charts

Before opening any report, define what your core commercial flow looks like. For e-commerce, this is usually a path like landing → category/product page → add to cart → checkout → purchase. For lead generation, it may be landing → service page → lead form → submit. These steps should form the basis of the audit.

If the funnel is defined vaguely, analytics will show noise. For example, some users may arrive from an ad, read the FAQ block, browse reviews, return to the CTA, and only then start filling out the form. Formally, that may look like “wandering,” but in reality it may be perfectly normal pre-purchase research. So first answer a simple question: what is the target action, and which intermediate steps truly matter?

What indicates that a user is “stuck”

Not every drop-off means there is a UX problem. A person may leave a page because of a changed intent, a limited budget, external circumstances, or simple curiosity. That is why it is useful to look not only at traffic loss, but at repeating behavioral patterns.

  • Backtracking between pages, especially between a product page, cart, and checkout.
  • Navigation loops when a user moves between several pages without making progress.
  • Excessive scrolling without interacting with the key CTA.
  • Repeated form errors, especially in specific fields.
  • A sharp difference between mobile and desktop scenarios.
  • Behavior before exit: several clicks on unclear elements, attempts to open the same field again, or lingering on one screen without action.

These signals suggest that the problem may not be with the product itself, but with a specific part of the interface: unclear wording, a weak CTA, an overly long form, an obstructed element, or keyboard inaccessibility.

GA4 helps you see the path, not just the result

In Google Analytics 4, a useful tool for UX auditing is Path exploration. It lets you see what steps users took before or after a specific event and compare the paths of converted and non-converted users. This helps reveal where their journeys start to differ.

For example, if people who completed an application often passed through a page with a detailed service description, while non-converted users moved from the landing page straight to deeper sections of the site and then back again, that may mean the main message on the first screen is not clear enough. Or, conversely, users may see the form but repeatedly return to the terms, delivery, pricing, or guarantees before submitting it — which suggests a lack of confidence.

User explorer is especially useful when you need to look at the behavior of specific user groups rather than aggregates. It is handy for diagnosing anomalous scenarios, for example when part of the audience starts the process but systematically fails to reach the final step.

An important nuance: Google notes that there may be small discrepancies in counts between different GA4 reports. Also, pathing may cover one or multiple sessions depending on the date range. So you should not draw conclusions from a single report. It is better to compare path exploration, funnels, segments, and audiences and look for a recurring pattern rather than perfect numerical alignment.

Microsoft Clarity: where friction becomes visible

Clarity is useful because it combines three types of signals: session recordings, heatmaps, and funnels. Together, they answer the questions: where did the user stop, what drew their attention, and at what stage did the loss occur?

You only need to interpret this data correctly. Clarity recordings are not a literal screen video, but a step-by-step visual reconstruction of interactions based on HTML and user events. That means you are not looking at “a person at a screen,” but at a behavioral model within your website or app. This approach works well for finding patterns, but it does not replace live observation and user interviews.

What is especially useful in recordings:

  • you can see whether the person notices the CTA;
  • you can check whether a key element gets lost below the fold;
  • you can identify repeated clicks on an inactive or unclear element;
  • it is easier to spot form issues when a user corrects the same field several times.

Heatmaps provide a quick overview of how people interact with the page: clicks, scrolling, and attention to specific areas. For a UX audit, this is especially useful on landing pages, service pages, and product pages. If the CTA gets almost no interaction, that may mean it is not visible enough, is placed where the user does not expect it, or is being buried under too much content.

However, a heatmap is not proof of understanding. It shows an action, but it does not explain the motivation. A user may click an element because of a wrong expectation rather than genuine interest. That is why heatmaps should be used as a signal for hypotheses, not as a final verdict.

How not to fool yourself with heatmaps

  • A "hot" zone isn't always success — it can mean confusion.
  • Many clicks on a non-clickable element signal a problem.
  • Review heatmaps together with session recordings.
  • Don't draw conclusions from a few dozen sessions.

How to read heatmaps without fooling yourself

The most common mistake is to find a “hot” area in a heatmap and automatically assume it is successful. In sales, what matters more is whether that area helps move the user further down the funnel. If people click a secondary element a lot but do not click the main CTA, that is a sign the focus has shifted.

Here is what to pay attention to:

  1. Whether the CTA is visible without scrolling on typical screens.
  2. Whether it competes with less important elements.
  3. Whether the click zone matches user expectations.
  4. Whether people reach the right section on mobile devices.
  5. Whether the page is overloaded with content that distracts attention.

Clarity also allows you to segment data by device, page, visitors, and actions. For commercial sites, this is critical: mobile and desktop often have different friction points. What works on a large screen can break down on a phone because of long scrolling, small fields, awkward input masks, or hidden buttons.

Forms are a separate source of loss that is often underestimated

If the funnel includes a form, this is often where the “silent” loss happens. The user is already interested, but does not complete the action because of micro-barriers. These may include validation errors, awkward field order, a poor phone mask, lack of autofill, or too many required fields.

When auditing a form, it is useful to look not only at the overall submit rate, but also at smaller signals:

  • which field causes users to stop most often;
  • where the most errors occur;
  • whether there are issues with hints and labels;
  • whether the form is easy to complete on mobile;
  • whether it is clear what happens after submission.

Sometimes the problem is not the button text itself, but the fact that the form does not give a sense of progress or asks for too much. In that case, even a good landing page will not save conversion: the user simply gets “stuck” at the step that requires effort.

What to do if the numbers conflict

When working with GA4 and Clarity, it is useful to remember that the data does not always match perfectly. Path exploration, funnels, segments, and audiences can produce different counts because of processing differences. That is normal, but only if you are not drawing conclusions from a single source.

A practical approach looks like this:

  • first, check whether there is a drop at a specific funnel stage;
  • then look at pathing to understand what people did before leaving;
  • next, compare recordings to see whether there is clear friction in the interface;
  • after that, formulate a hypothesis and test it in a usability study.

This chain reduces the risk of drawing the wrong conclusion, for example that the problem is only in the button, when in fact users do not trust the page because there is not enough information or they cannot complete the action because of a technical error.

Accessibility can also be the reason users get stuck

Not every UX issue is about visual design. Some problems come from accessibility: awkward keyboard navigation, unclear labels, contrast issues, incorrect focus handling, or validation errors without a clear explanation. In such cases, a user may appear to be “careless,” when in fact they simply cannot interact with the interface properly.

Nielsen Norman Group separately emphasizes the value of usability testing in a real product, not just at the mockup stage. For sales audits, this means: do not stop at analytics. If there is a suspicion of accessibility issues, at least some sessions should be checked with users of assistive technologies or in scenarios close to their experience.

What to expect from Clarity and what not to demand from it

Clarity is a free service, which makes it convenient for a quick start. But it has limitations that should not be ignored. Microsoft explicitly states that the service should not be used on sites or apps intended for users under 18. For some projects, that is an important legal and ethical barrier.

Session recordings are also not stored indefinitely in full. If you want to investigate a problem retrospectively, you cannot delay the analysis for too long. This is especially relevant after design changes, a campaign launch, or a form redesign: first collect the data, then interpret it, and only then make changes.

A practical workflow for a funnel UX audit

To keep the audit from turning into a review of pretty charts, it helps to work through a simple sequence:

  1. Define the key funnel and the target action.
  2. Check at which stage the biggest drop-off occurs.
  3. Look at path exploration in GA4 to understand where users go before leaving.
  4. Segment the data by mobile and desktop, as well as by new and returning visitors.
  5. Open session recordings in Clarity and look for recurring signs of friction.
  6. Review heatmaps for weak CTAs, blind spots, and hierarchy issues.
  7. Analyze the form separately if it is part of the path.
  8. Confirm the hypotheses with a short usability test or interview.

After that, you should no longer have an abstract “users are not converting,” but a concrete list of what exactly is getting in the way, on which screen, for which segment, and what type of fix is needed — content-related, visual, technical, or accessibility-related.

That is the real value of a UX audit: it turns a conversion drop into a diagnosed problem. And when you know where users get stuck, the next step is no longer guesswork, but targeted work on the funnel that truly moves sales forward.

Frequently asked questions

Where does a funnel UX audit start?

With a description of your funnel: the steps a user takes from entry to inquiry or purchase. Only then open reports and look for where people drop off.

Which tools should be used?

GA4 shows paths and drop-offs between steps, while Microsoft Clarity provides session recordings, heatmaps and funnels that show where friction occurs.

Why are forms a common drop-off point?

Unnecessary fields, unclear error messages, missing hints and poor mobile usability make people abandon the form at the last step.